Mechanical Engineering (Paper-II) General Studies

Uttarakhand Government Jobs Engineer 2023

  • Year 2023
  • Conducted By UKPSC
  • Maximum Marks 360

Exam Details

Detail Information
Examination UKPSC Regional Inspector (Technical) Exam
Year 2023
Conducting Body UKPSC
Maximum Marks 360

This page hosts the UKPSC Regional Inspector (Technical) Exam (2023) question paper conducted by UKPSC. Maximum marks: 360. Read exam instructions and page-2 questions online, or download the official PDF for offline practice.

Major Topics Covered

  • UKPSC Regional Inspector (Technical) Exam
  • UKPSC
  • 2023 question paper
  • previous year paper
  • PDF download

Why This Paper is Important

  • Useful for UKPSC Regional Inspector (Technical) Exa preparation
  • Helps understand the latest exam pattern
  • Useful for practice and self-assessment
  • Covers frequently asked General Studies topics
  • Helpful for analysing question trends

Related Resources

Instructions

  • यदि किसी प्रश्न में किसी प्रकार की कोई मुद्रण या तथ्यात्मक त्रुटि हो तो प्रश्न के अंग्रेजी तथा हिन्दी रूपान्तरों में से अंग्रेजी रूपान्तर को मानक माना जायेगा ।
  • अभ्यर्थी अपने अनुक्रमांक, विषय-कोड एवं प्रश्न-पुस्तिका की सीरीज का अंकन OMR Sheet में निर्दिष्ट कॉलम में सही-सही करें, अन्यथा
  • उत्तर-पत्रक का मुल्यांकन नहीं किया जायेगा।
  • अभ्यर्थी रफ कार्य हेत् प्रश्न-पुस्तिका (बुकलेट) के अन्त में दिये गये पृष्ठों का ही केवल उपयोग करें ।
  • अलग से इस हेतु वर्किंग शीट उपलब्ध नहीं करायी
  • अभ्यर्थी प्रश्न-पुस्तिका के अंदर रफ कार्य के अतिरिक्त कुछ भी न लिखें ।
  • इस प्रश्न-पुस्तिका में 180 प्रश्न (वस्तुनिष्ठ प्रकार) हैं ।
  • प्रत्येक प्रश्न के चार वैकल्पिक उत्तर, प्रश्न के नीचे (a), (b), (c) एवं (d) दिये गये हैं ।
  • जिस उत्तर को आप सही या सबसे उचित समझते हैं, उत्तर-पत्रक (ओ.एम.आर. आंसर शीट) में उसके अक्षर वाले वृत्त को काले अथवा नीले बॉल प्वाइंट पेन से पूरा काला / नीला कर दें।
  • प्रश्न–पुस्तिका में अंकित सभी प्रश्न अनिवार्य है और प्रत्येक प्रश्न के समान अंक हैं ।
  • आपके जितने उत्तर सही होंगे उन्हीं के अनुसार अंक दिये जायेंगे ।
  • आयोग द्वारा आयोजित की जाने वाली वस्तुनिष्ठ प्रकृति की परीक्षाओं में ऋणात्मक मूल्यांकन (Negative Marking) पद्धति अपनायी जायेगी । अभ्यर्थी
  • द्वारा प्रत्येक प्रश्न हेतु दिए गए गलत उत्तर के लिए या अभ्यर्थी द्वारा एक प्रश्न के एक से अधिक उत्तर देने के लिए (चाहे दिए गए उत्तर में से एक सही ही क्यों न हो), उस प्रश्न के लिए निर्धारित अंकों का एक-चौथाई अंक दण्ड के रूप में काटा जाएगा ।
  • दण्ड स्वरूप प्राप्त अंकों के योग को कुल प्राप्तांक में से घटाया जाएगा ।
  • अपने उत्तर आपको अलग से दिये गये ओ.एम.आर. उत्तर-पत्रक में अंकित करने हैं ।
  • आपके द्वारा सभी उत्तर केवल ओ.एम.आर. उत्तर-पत्रक पर ही
  • दिया जाना अनिवार्य है & ओ.एम.आर. उत्तर-पत्रक के अतिरिक्त अन्य कहीं पर दिया गया उत्तर मान्य नहीं होगा ।
  • ओ.एम.आर. उत्तर-पत्रक पर कुछ लिखने के पूर्व उसमें दिये गये सभी अनुदेशों को सावधानीपूर्वक पढ़ लें ।
  • सूचनाओं को अभ्यर्थी द्वारा परीक्षा प्रारम्भ होने से पूर्व भरा जाना अनिवार्य है ।
  • ओ.एम.आर. उत्तर-पत्रक तीन प्रतियों (मूल प्रति, कार्यालय प्रति एवं अभ्यर्थी प्रति) में है ।
  • परीक्षा समाप्ति के उपरान्त अभ्यर्थी ओ.एम.आर. उत्तर-पत्रक की मूल प्रति एवं कार्यालय प्रति अन्तरीक्षक (Invigilator) को हस्तगत करने के उपरान्त ही कक्ष छोड़ें, अन्यथा की स्थिति में आयोग द्वारा नियमानुसार कार्यवाही की जाएगी ।
  • ओ.एम.आर. उत्तर-पत्रक की अभ्यर्थी प्रति, अभ्यर्थी अपने साथ ले जा सकते हैं ।
  • यदि आपने इन अनुदेशों को पढ़ लिया है, इस पृष्ठ पर अपना अनुक्रमांक अंकित कर दिया है और ओ.एम.आर. उत्तर-पत्रक पर वांछित सूचनायें भर दी हैं, तो तब तक प्रतीक्षा करें, जब तक आपको प्रश्न-पुस्तिका खोलने को नहीं कहा जाता ।
  • ओ. एम. आर. उत्तर-पत्रक (O. M. R. Answer Sheet) का मूल्यांकन ओ. आंसर शीट पर अभ्यर्थी द्वारा अंकित सीरीज कोड (A, B, C, D) के आधार पर ही किया जायेगा ।
  • प्रश्न-पुस्तिका (Question Booklet) में से ओ. एम. आर. उत्तर-पत्रक (O. M. R. Answer Sheet) निकालने के पश्चात् ओ. उत्तर-पत्रक पर प्रश्न-पुस्तिका क्रमाक एवं प्रश्न-पुस्तिका के सीरीज कोड (A, B, C, D) की प्रविष्टि साक्यानीपूर्वक करें।
  • यदि उक्तानसार कार्यवाही नहीं की जाती है, तो उसके लिए अभ्यर्थी स्वयं जिम्मेदार होगा ।
  • जब तक न कहा जाय इस प्रश्न-पुस्तिका को न खोलें ।
  • महत्वपूर्ण : प्रश्न-पुस्तिका खोलने पर तुरन्त जाँच कर देख लें कि प्रश्न-पुस्तिका के सभी पेज भली-भाँति छपे हुए हैं ।
  • यदि प्रश्न-पुस्तिका सीलबंद न हों , अथवा कोई अन्य कमी हो, तो अन्तरीक्षक को दिखाकर उसी सीरीज की दसरी प्रश्न-पुस्तिका प्राप्त कर लें ।

Questions (page 2)

Q1.

  • (a) Mechanical Engineering-II Compressibility of a liquid is expressed by its - 1. Density
  • (b) Volume
  • (c) Pressure
  • (d) Bulk modulus of elasticity

Q2.

  • (a) The velocity gradient in the transverse direction for a fluid flow equals The pressure gradient in the flow
  • (b) The rate of shear strain
  • (c) The stress at that point
  • (d) The strain at that point For a laminar flow through a pipe, the discharge varies
    3. (a) as the square of diameter (b) as the inverse of viscosity
    (c) inversely as the pressure gradient (d) as the square of viscosity
    4. The frictional resistance in case of turbulent flow is independent of (a) pressure of flow (b) density of fluid
    (c) temperature of fluid (d) area of surface in contact In case of frictionless flow of an incompressible fluid, the summation of kinetic energy,
    5. potential energy and pressure energy per unit weight of fluid (a) gradually increases (b) remains the same
    (c) decreases (d) first increases then decreases For turbulent flow in rough pipes, the coefficient of friction depends only on
    6. (b) length of the pipe (a) centre line velocity
    (c) wetted perimeter of pipe (d) relative roughness If v = average velocity of flow, D = diameter of pipe, then in case of turbulent flow through
    7. rough pipe, the head loss in friction is proportional to (d) v2/D2 (b) v2/D
    (c) v/D2 (a) v/D If v = velocity, f = coefficient of friction and \rho = density for turbulent flow through rough
    8. pipe, then wall shear stress is given by (a) 2 f \rho v2 (b) 1/2 f \rho v2
    (c) 4 f \rho v2 (d) 1/4 f \rho v2
    9. In a flow through tube, the flow is generally assumed to be turbulent when - (b) 1000 ≤ \textRe ≤ 2300
    (c) \textRe ≥ 5 × 105 (a) Re ≤ 1000 (d) Re > 2300 (Where Re is Reynold's number.) For a sudden expansion in pipe flow, if D1 and D2 are respectively diameters of smaller and
    10. larger pipe, then the pressure rise will be maximum when (D1)/(D2) is equal to (b) (1)/(√(2))
    (c) 1/3 (a) 1/2 (d) (1)/(√(3)) The U = velocity of fluid stream, L = Characteristic length and g = gravitational acceleration,
    11. then Froude number is expressed as (a) (U)/(√(gL)) (b) (2U)/(√(gL))
    (c) 1/2 \cdot (U)/(√(gL)) (d) (1)/(√(2)) \cdot (U)/(√(gL)) During a fluid flow around a sphere, if FD = total drag, then skin friction drag is
    12. (b) 1/3FD (d) (3/2)FD (a) 1/2FD
    (c) 2/3FD Series-A MEN-02 2\circ

Question paper preview

Scanned pages 1–2 for reference. Download the official PDF for the full paper.

Page 1
UKPSC Regional Inspector (Technical) Exam 2023 UKPSC question paper page 1 instructions scan PDF download
Page 2
UKPSC Regional Inspector (Technical) Exam 2023 UKPSC question paper page 1 instructions scan PDF download

Free question paper download

Download question paper PDF

  • 445 KB
  • 32 pages
  • PDF format

Frequently asked questions

Where can I download the UKPSC Regional Inspector (Technical) Exam question paper PDF?

Use the Download PDF button on this page to save the official UKPSC Regional Inspector (Technical) Exam (2023) General paper paper hosted on QuizCurrent.

Who conducts the UKPSC Regional Inspector (Technical) Exam?

The UKPSC Regional Inspector (Technical) Exam is conducted by UKPSC. This portal reproduces the scanned question paper for practice and revision.

Does this page include exam instructions and questions?

Yes. Page 1 instructions and page 2 questions are extracted from the official PDF OCR so you can read them without downloading.

How many questions are on this paper?

Refer to the instructions section on page 1 for the total question count and marking scheme.

← Back to Engineer papers