Mechanical Engineering Paper-I | Uttarakhand JE Exam 2013

Uttarakhand Government Jobs Engineer 2013

  • Year 2013
  • Conducted By UKPSC
  • Maximum Marks 360

Exam Details

Detail Information
Examination Uttarakhand Combined Junior Engineer Selection Examination
Year 2013
Conducting Body UKPSC
Maximum Marks 360

This document contains the Mechanical Engineering (Paper-I) question paper for the Uttarakhand Combined Junior Engineer Selection Examination held in 2013. The exam is for 360 marks and lasts 3 hours.

Major Topics Covered

  • Mechanical Engineering
  • Uttarakhand Government Jobs
  • Junior Engineer Exam
  • Elasticity
  • Stress and Strain
  • Fatigue Life
  • Moment of Inertia
  • Boiler Joints
  • Necking Phenomenon
  • Flow Stress

Why This Paper is Important

  • Useful for Uttarakhand Combined Junior Engineer Sel preparation
  • Helps understand the latest exam pattern
  • Useful for practice and self-assessment
  • Covers frequently asked General Studies topics
  • Helpful for analysing question trends

Related Resources

Instructions

  • यदि किसी प्रश्न में किसी प्रकार की कोई मुद्रण या तथ्यात्मक प्रकार की त्रुटि हो तो प्रश्न के अंग्रेजी तथा हिन्दी रूपान्तरों
  • में से अंग्रेजी रूपान्तर को मानक माना जायेगा । सभी प्रश्नों के अंक समान हैं ।
  • अभ्यर्थी अपने अनुक्रमांक, विषय एवं प्रश्न-पुस्तिका की सीरीज की कोडिंग सही-सही करें, अन्यथा उत्तर-पत्रक का
  • मूल्यांकन नहीं किया जायेगा और उसकी जिम्मेदारी स्वयं अभ्यर्थियों की होगी ।
  • अभ्यर्थी रफ कार्य हेतु प्रश्न-पुस्तिका (बुकलेट) के अन्त में दिये गये पृष्ठों का उपयोग करें ।
  • इस प्रश्न-पुस्तिका में 180 आइटम्स (प्रश्न) हैं ।
  • प्रत्येक आइटम के चार वैकल्पिक उत्तर आइटम के नीचे दिये गये हैं ।
  • जिस उत्तर को आप सही या सबसे उचित समझते हैं, उत्तर-पत्रक (आन्सर शीट) में उसके अक्षर वाले वृत्त को काले अथवा नीले बॉल प्वाइंट पेन से पूरा काला कर दें ।
  • आपको निर्देशित किया जाता है कि किसी भी प्रकार के कैलकुलेटर का प्रयोग अनुमन्य नहीं है.।
  • सभी प्रश्नों (आइटमों) का उत्तर दिया जाना है और प्रत्येक प्रश्न (आइटम) के समान अंक हैं ।
  • आयोग द्वारा आयोजित की जाने वाली वस्तुनिष्ठ प्रकृति की परीक्षाओं में ऋणात्मक मूल्यांकन (Negative Marking) पद्धति
  • उम्मीदवार द्वारा प्रत्येक प्रश्न के लिए दिए गए गलत उत्तर के लिए या उम्मीदवार द्वारा एक प्रश्न के एक से अधिक उत्तर देने के लिए (चाहे दिए गए उत्तर में से एक सह़ी ही क्यों न हो), उस प्रश्न के लिए दिए जाने वाले अंकों का एक चौथाई दण्ड के रूप में काटा जाएगा ।
  • दण्ड स्वरूप प्राप्त अंकों के योग को कुल प्राप्तांक में से घटाया जाएगा ।
  • अपने उत्तर आपको अलग से दियें गये उत्तर-पत्रक में अंकित करने हैं ।
  • आयको अपने सभी उत्तर केवल उत्तर-पत्रक पर ही देने हैं ।
  • उत्तर-पत्रक के अतिरिक्त अन्य कहीं पर दिया गया उत्तर मान्य न होगा ।
  • उत्तर-पत्रक पर कुछ लिखने के पूर्व उसमें दिये गये सभी अनुदेशों को सावधानीपूर्वक पढ़ लें ।
  • जो सूचनायें उसमें वांछित हों उन्हें अभी भर लें। through the large main
  • परीक्षा समाप्ति के उपरान्त अन्तरीक्षक को उत्तर-पत्रक वाषस लौटा दें ।
  • यदि आपने इन अनुदेशों को पढ़ लिया है, इस पृष्ठ पर अपना अनुक्रमांक अंकित कर दिया है और उत्तर पत्रक पर वांछित सूचनायें भर दी हैं, तो तब तक इन्तजार करें जब तक आपको प्रश्न-पुस्तिका खोलने को नहीं कहा जाता।
  • जब तक न कहा जाय इस प्रश्न-पुस्तिका को न खोलें ।
  • महत्त्वपूर्ण: प्रश्न-पुस्तिका खोलने पर तुरन्त जाँच कर देख लें कि प्रश्न-पुस्तिका के सभी पेज भली-भाँति छपे हुए हैं ।
  • यदि प्रश्न- पुस्तिका में कोई कमी हो तो अन्तरीक्षक को दिखाकर उसी सीरीज की दूसरी प्रश्न-पुस्तिका प्राप्त कर लें । KAU-05- 1229, 192

Questions (page 2)

Q1. (a) (b) 0.5 zero (c) (d) 1 between 0 and 1

  • (a) 0.5 zero
  • (b) 1 between 0 and 1

Q2. Hoop stress in thin walled cylinder is longitudinal tensile stress

  • (a) Hoop stress in thin walled cylinder is longitudinal tensile stress
  • (b) radial stress circumferential tensile stress

Q3. Fatigue (a) (b) Plastic deformation (c) Creep (d) Endurance The fatigue life of a part can be improved by

  • (a) Fatigue
  • (b) Plastic deformation
  • (c) Creep

Q4. Electroplating

  • (a) Electroplating
  • (b) Polishing Coating
  • (c) Shot peening

Q5. Fluid in motion

  • (a) Fluid in motion
  • (b) Breaking point
  • (c) Plastic deformation of solids

Q6. (Where M = mass of the solid sphere r = radius of the sphere) (c) 2/5 Mr2 (b) 2/3 Mr2 (d) 1/2 Mr2 Mr2

  • (a) 1/2 Mr2 Mr2
  • (b) 2/5 Mr2
  • (c) (Where M = mass of the solid sphere r = radius of the sphere)

Q7. Stress Strain - The above stress-strain diagram is for Ductile material

  • (a) Stress Strain - The above stress-strain diagram is for Ductile material
  • (b) Brittle material
  • (c) Soft material None of these

Q8. The longitudinal joint of a boiler shell is always a Lap joint

  • (a) The longitudinal joint of a boiler shell is always a Lap joint
  • (b) Butt joint
  • (c) Lozenge joint

Q9. change in volume to original volume.

  • (a) change in volume to original volume.
  • (b) change in length to original length.
  • (c) change in lateral dimension to original lateral dimension.

Q10. (a) Brittle materials (b) Ductile materials Both brittle as well as ductile materials (c) (d) None of the above Series-C \mathbf2 KAU-05 9 - 12

  • (a) Brittle materials
  • (b) Ductile materials Both brittle as well as ductile materials
  • (c) None of the above Series-C \mathbf2 KAU-05 9 - 12

Question paper preview

Scanned pages 1–2 for reference. Download the official PDF for the full paper.

Page 1
Mechanical Engineering Paper-I | Uttarakhand JE Exam 2013 — page 1 instructions scan PDF download
Page 2
Mechanical Engineering Paper-I | Uttarakhand JE Exam 2013 — page 1 instructions scan PDF download

Free question paper download

Download question paper PDF

  • 8.9 MB
  • PDF format

Frequently asked questions

Where can I download the Uttarakhand Combined Junior Engineer Selection Examination question paper PDF?

Use the Download PDF button on this page to save the official Uttarakhand Combined Junior Engineer Selection Examination (2013) General paper paper hosted on QuizCurrent.

Who conducts the Uttarakhand Combined Junior Engineer Selection Examination?

The Uttarakhand Combined Junior Engineer Selection Examination is conducted by UKPSC. This portal reproduces the scanned question paper for practice and revision.

Does this page include exam instructions and questions?

Yes. Page 1 instructions and page 2 questions are extracted from the official PDF OCR so you can read them without downloading.

How many questions are on this paper?

Refer to the instructions section on page 1 for the total question count and marking scheme.

← Back to Engineer papers