UKPSC JE Electrical Engineering Paper I 2013 Question Paper PDF

Uttarakhand Government Jobs Engineer 2013

  • Year 2013
  • Conducted By UKPSC
  • Questions 180
  • Maximum Marks 360
  • Duration 03 Hours
  • Languages Hindi & English

Exam Details

Detail Information
Examination Uttarakhand Combined Junior Engineer Selection Examination
Year 2013
Conducting Body UKPSC
Paper Electrical Engineering (Paper-I)
Subject Electrical Engineering
Duration 03 Hours
Maximum Marks 360
Number of Questions 180
Question Type Objective (MCQ)

This is the official question paper for the Uttarakhand Combined Junior Engineer Selection Examination 2013, Paper-I (Electrical Engineering). Conducted by UKPSC, this objective-type paper carried a maximum of 360 marks and was allocated 3 hours for completion. It contains 180 items (questions) with four options each. Aspirants can use this paper to understand the exam pattern, difficulty level, and key topics covered in Electrical Engineering for the JE recruitment. Practicing with previous year papers like this is crucial for effective preparation.

Major Topics Covered

  • Single Stage Amplifier
  • Transistor Biasing
  • P-N Junction Diode
  • Common Emitter Amplifier
  • Half-Wave Rectifier
  • Power Supply Ripple Factor
  • Transistor Power Dissipation
  • Common Base Amplifier
  • Emitter Follower
  • Semiconductor Materials
  • Germanium
  • Diode Circuits
  • Transformer
  • DC Voltage Calculation

Why This Paper is Important

  • Useful for Uttarakhand Combined Junior Engineer Sel preparation
  • Helps understand the latest exam pattern
  • Useful for practice and self-assessment
  • Covers frequently asked General Studies topics
  • Helpful for analysing question trends

Related Resources

  • UKPSC JE Electrical Engineering Paper II 2013
  • UKPSC JE Electrical Engineering Paper I 2014
  • UKPSC JE Civil Engineering Paper I 2013
  • UKPSC JE Electrical Engineering Paper I 2013 Answer Key
  • UKPSC JE Electrical Engineering Syllabus
  • UKPSC JE Exam Pattern
  • UKPSC JE Civil Engineering
  • UKPSC JE Mechanical Engineering

Instructions

  • यदि किसी प्रश्न में किसी प्रकार की कोई मुद्रण या तथ्यात्मक प्रकार की त्रुटि हो तो प्रश्न के अंग्रेजी तथा हिन्दी रूपान्तरों
  • में से अंग्रेजी रूपान्तर को मानक माना जायेगा । सभी प्रश्नों के अंक समान हैं ।
  • अभ्यर्थी अपने अनुक्रमांक, विषय एवं प्रश्न-पुस्तिका की सीरीज की कोडिंग सही-सही करें, अन्यथा उत्तर-पत्रक का
  • मुल्यांकन नहीं किया जायेगा और उसकी जिम्मेदारी स्वयं अभ्यर्थियों की होगी ।
  • अभ्यर्थी रफ कार्य हेतु प्रश्न-पुस्तिका (बुकलेट) के अन्त में दिये गये पृष्ठों का उपयोग करें ।
  • इस प्रश्न-पुस्तिका में 180 आइटम्स (प्रश्न) हैं ।
  • प्रत्येक आइटम के चार वैकल्पिक उत्तर आइटम के नीचे दिये गये हैं ।
  • जिस उत्तर को आप सही या सबसे उचित समझते हैं, उत्तर-पत्रक (आन्सर शीट) में उसके अक्षर वाले वृत्त को काले अथवा नीले बॉल प्वाइंट पेन से पूरा काला कर दें ।
  • आपको निर्देशित किया जाता है कि किसी भी प्रकार के कैलकुलेटर का प्रयोग अनुमन्य नहीं है ।
  • सभी प्रश्नों (आइटमों) का उत्तर दिया जाना है और प्रत्येक प्रश्न (आइटम) के समान अंक हैं ।
  • आयोग द्वारा आयोजित की जाने वाली वस्तुनिष्ठ प्रकृति की परीक्षाओं में ऋणात्मक मूल्यांकन (Negative Marking) पद्धति
  • उम्मीदवार द्वारा प्रत्येक प्रश्न के लिए दिए गए गलत उत्तर के लिए या उम्मीदवार द्वारा एक प्रश्न के एक से अधिक उत्तर देने के लिए (चाहे दिए गए उत्तर में से एक सही ही क्यों न हो), उस प्रश्न के लिए दिए जाने वाले अंकों का एक चौथाई दण्ड के रूप में काटा जाएगा ।
  • दण्ड स्वरूप प्राप्त अंकों के योग को कुल प्राप्तांक में से घटाया जाएगा ।
  • अपने उत्तर आपको अलग से दिये गये उत्तर-पत्रक में अंकित करने हैं ।
  • आपको अपने सभी उत्तर केवल उत्तर-पत्रक पर ही देने हैं ।
  • उत्तर-पत्रक के अतिरिक्त अन्य कहीं पर दिया गया उत्तर मान्य न होगा ।
  • उत्तर-पत्रक पर कुछ लिखने के पूर्व उसमें दिये गये सभी अनुदेशों को सावधानीपूर्वक पढ़ लें ।
  • जो सूचनायें उसमें वांछित हों उन्हें अभी भर लें।
  • परीक्षा समाप्ति के उपरान्त अन्तरीक्षक को उत्तर-पत्रक वापस लौटा दें ।
  • यदि आपने इन अनुदेशों को पढ़ लिया है, इस पृष्ठ पर अपना अनुक्रमांक अंकित कर दिया है और उत्तर-पत्रक पर वांछित सूचनायें भर दी हैं, तो तब तक इन्तजार करें जब तक आपको प्रश्न-पुस्तिका खोलने को नहीं कहा जाता।
  • जब तक न कहा जाय इस प्रश्न-पुस्तिका को न खोलें ।
  • महत्त्वपूर्ण : प्रश्न-पुस्तिका खोलने पर तुरन्त जाँच कर देख लें कि प्रश्न-पुस्तिका के सभी पेज भली-भाँति छपे हुए हैं ।
  • यदि प्रश्न- पुस्तिका में कोई कमी हो तो अन्तरीक्षक को दिखाकर उसी सीरीज की दूसरी प्रश्न-पुस्तिका प्राप्त कर लें । KAU-07-CH

Questions (page 2)

Q1. In a single stage amplifier D.C and A.C load lines

  • (a) are always parallel
  • (b) are perpendicular to each other
  • (c) cross each other at Q-point
  • (d) are inclined but do not cross each other

Q2. Phase reversed of 180° as compared to input occurs in the output of

  • (a) C_E amplifier
  • (b) C_B amplifier
  • (c) C_C amplifier
  • (d) All of these

Q3. Improper biasing of a transistor circuit leads to

  • (a) excessive heat production in collector.
  • (b) faulty location of load line.
  • (c) heavy loading of emitter.
  • (d) distortion in output signal.

Q4. When a P-N junction is reverse biased

  • (a) it offers high resistance
  • (b) its depletion layer becomes narrow
  • (c) its barrier potential decreases
  • (d) it breaks down

Q5. The current gain of a common emitter transistor is 50. The change in emitter current for a corresponding change of 5 mA in base current will be

  • (a) 50 mA
  • (b) 55 mA
  • (c) 250 mA
  • (d) 255 mA

Q6. If the maximum current of a half-wave rectified wave is 10 A, its r.m.s value is given by

  • (a) 10 A.
  • (b) 0 A.
  • (c) 37 A.
  • (d) 7.07,mathrm{A}

Q7. A common emitter amplifier is characterized by

  • (a) low voltage gain
  • (b) very high output impedance
  • (c) moderate power gain
  • (d) signal phase reversal

Q8. The maximum rectification efficiency of a half-wave rectifier is

  • (a) 40.6%
  • (b) 81.2%
  • (c) 88.0%
  • (d) $100%

Q9. The ripple factor of a power supply is a measure of

  • (a) its filter efficiency
  • (b) its voltage regulation
  • (c) its purity of output
  • (d) diode rating

Q10. The power dissipation in a transistor is the product of

  • (a) Emitter current and emitter to base voltage.
  • (b) Collector current and collector to base voltage.
  • (c) Emitter current and collector to emitter voltage.
  • (d) None of the above

Q11. Consider the following circuit configurations :
1. Common emitter
2. Common base
3. Emitter follower
The correct sequence in increasing input impedance of these configuration is

  • (a) 2, 1, 3
  • (b) 1, 2, 3
  • (c) 1, 3, 2
  • (d) 3, 2, 1

Q12. The forbidden gap of a Germanium semiconductor material is

  • (a) 0.12 ext{ eV}
  • (b) 0.72 ext{ eV}
  • (c) 7.20 ext{ eV}
  • (d) None of these

Question paper preview

Scanned pages 1–2 for reference. Download the official PDF for the full paper.

Page 1
UKPSC JE Electrical Engineering Paper I 2013 question paper page 1 instructions scan PDF download Uttarakhand Junior Engineer Exam
Page 2
UKPSC JE Electrical Engineering Paper I 2013 question paper page 1 instructions scan PDF download Uttarakhand Junior Engineer Exam

Free question paper download

Download question paper PDF

  • 9.2 MB
  • PDF format

Frequently asked questions

What is the full name of the exam?

The full name of the exam is the Uttarakhand Combined Junior Engineer Selection Examination.

Which year is this question paper from?

This question paper is from the year 2013.

Who conducts the Uttarakhand JE exam?

The Uttarakhand JE exam is conducted by the UKPSC (Uttarakhand Public Service Commission).

What is the subject of this paper?

This paper is for Electrical Engineering, specifically Paper-I.

What is the total maximum marks for this paper?

The maximum marks for this paper are 360.

What is the time duration allowed for this paper?

The time allowed for this paper is 03 Hours.

← Back to Engineer papers