RPSC Lecturer Electrical Engineering 2011 Question Paper PDF

Rajasthan Government Jobs Lecturer 2011

  • Year 2011
  • Conducted By RPSC
  • Questions 100
  • Maximum Marks 100
  • Duration 2 Hours
  • Languages Hindi & English

Exam Details

Detail Information
Examination LECTURER (TECH. EDU.)
Year 2011
Conducting Body RPSC
Paper Electrical Engineering
Subject Electrical Engineering
Duration 2 Hours
Maximum Marks 100
Number of Questions 100
Question Type Objective (MCQ)

This is the official question paper for the RPSC Lecturer (Technical Education) examination held in 2011, specifically for the Electrical Engineering subject. The paper consists of 100 objective questions to be answered in 2 hours, with a maximum of 100 marks. Aspirants preparing for the RPSC Lecturer exam can use this paper to understand the exam pattern, difficulty level, and important topics covered in Electrical Engineering. Practicing with this previous year's paper is crucial for effective preparation and identifying areas for improvement.

Major Topics Covered

  • Synchronous Machines
  • DC Machines
  • Transformers
  • DC Motors

Why This Paper is Important

  • Useful for LECTURER (TECH. EDU.) preparation
  • Helps understand the latest exam pattern
  • Useful for practice and self-assessment
  • Covers frequently asked General Studies topics
  • Helpful for analysing question trends

Related Resources

  • RPSC Lecturer Electrical Engineering 2015 Question Paper
  • RPSC Lecturer Electrical Engineering 2018 Question Paper
  • RPSC Assistant Engineer Electrical 2016 Question Paper
  • RPSC Lecturer Electrical Engineering 2011 Answer Key
  • RPSC Lecturer Electrical Engineering Syllabus
  • RPSC Lecturer Exam Pattern
  • RPSC Assistant Engineer
  • RPSC Junior Engineer

Instructions

  • If more than one answers are marked, it would प्रत्येक प्रश्न का केवल एक हो उत्तर दीजिए। З. be treated as wrong answer. एक से अधिक उत्तर देने की दशा में प्रश्न के उत्तर को गलत
  • Each question has four alternative responses माना जाएगा । urarked scrially as 1, 2, 3,
  • You have to darken प्रत्येक प्रश्न के चार वैकल्पिक उत्तर दिवे गये हैं, जिन्हें लम्भः
  • cally one circle or bubble indicating the correct 1, 2, 3, 4 अंकित किया गया है।
  • अध्यर्थी को सही उत्तर answer on the Answer Sheet using BLUE BALL निर्दिष्ट करते हुए उनमें से केवल एक गोले अथवा बदल को POINT PEN.
  • 1/3 part of the mark(s) of each question will उत्तर-पत्रक पर नीले बॉल चाइंट पेन से गहरा करना है । be deducted for each wrong answer. (A wrong प्रत्येक गलत उत्तर के लिए प्रश्न अंक का 1/3 भाग काटा
  • asswer means an incorrect answer or more than ज्ञयेगा।
  • गलत उत्तर से तात्पर्य अशुद्ध उत्तर अथवा किसी भंदैर्ष्टिं one answers for any question. Leaving all the प्रश्न के एक से अधिक उत्तर से हैं।
  • किसी भी प्रश्न से relevant circles or bubbles of any question blank संबंधित गोले या बबल को खाली छोड़सा गजर उत्तर नहीं will not be considered as wrong answer.) The candidate should ensure that Series Code of माना जायेगा! the Question Paper Booklet and Answer Sheet |
  • प्रश्न-पत्र पुस्तिका एवं उत्तर पत्रक के निम्ताफे को सीक्ष mast be same after opening the envelopes. In खोलने पर परीक्षार्थी यह सुनिधिचत कर ले कि उसके प्रश्न - ase they are different, a candidate must obtain पत्र पुखिका पर बही सीरीज अंकिंग है जो उत्तर बत्रक पर another Question Paper of the same series. | अंकित है।
  • इसमें कोई फिलता हो तो बीधक से प्रश्न पत की Candidate himself shall be responsible for sasuring this, ही सीरीज बाला दूसरा प्रश्न-पत्र का क्रिफाया प्राप्त कर ले। Mobile Phone or any other electronic gadget in Α. ऐसा न करने पर जिम्मेदारी अध्यर्थी की होगी। the examination half is strictly prohibited. A मोबाईल फोन अथवा इलेक्ट्रोनिक यंत्र का परीक्षा टॉल में
  • candidate found with any of such objectionable प्रयोग पूर्णतया चर्चित हैं।
  • यदि किसी अभ्यर्थी के पास ऐसी material with him/her will be strictly dealt as per कोई वर्जित सामग्री मिलती है तो उसके विरुद्ध आधोग द्वारा mles, Please correctly fill your Roll Number in O.M.R. नियमानुसार कार्यवाही की अत्येगी। Sheet. 5 marks will be deducted for filling wrong कृपया अपना रोल नम्बर ओ.एम.आर. पत्रक पर सत्यधानी
  • a incomplete Roll Number. पूर्वक सही भरें।
  • गलत अथवा अपूर्ण रोल नम्बर भरने पर 5 Warning : If a candidate is found copying or if अंक कुल प्राप्तोकों में से अनिवार्थ रूप से काटे जाएंगे। any unauthorised material is found in चेतावनी : अगर कोई अभ्यर्थी चकल करते पकड़ा जाता है या his/her possession, F.I.R. would be उसके पास से कोई अनधिकृत सामग्री पाई जाती है. तो lodged against him/her in the Police Station and he/she would liable to be उस अभ्यर्थी के विरुद्ध पुलिस में प्राथमिकी दर्ज कराई prosecuted under Section 3 of the [ जायेगो और आर. पी. ई. (अनुचित साथनों की रोकथाम) R.P.E. (Prevention of Unfairmeans) अधिनियम, 1992 के नियम 3 के तहत कार्यवाही की Act,
  • Commission may also जायेगी।
  • साथ ही आयोग ऐसे अध्यर्थी को भविष्य में debar him/her permanently from all होने वाली आयोग की समस्त परीक्षाओं से विवर्जित कर future examinations οf the. Commission. सकता है। WBEE6_A] WHILM [Contd. . J.

  • Only one answer is to be given for each question.

Questions (page 2)

Q1. In relation to the synchronous machines, which one of the following statements is false?

  • (1) In salient pole machines, the direct-axis synchronous reactance is greater than the quadrature-axis synchronous reactance
  • (2) The damper bars help the synchronous motor
  • (3) Short circuit ratio is the ratio of the field current required to produce the rated voltage on open circuit to the rated armature current
  • (4) The V-curve of a synchronous motor represents the variation in the armature current with field excitation, at a given output power

Q2. In a DC machine, which of the following statements is true?

  • (1) Compensating winding is used for neutralizing armature reaction while inter pole winding is used for producing residual flux
  • (2) Compensating winding is used for improving commutation while inter pole winding is used for neutralizing armature reaction
  • (3) Compensating winding is used for improving commutation while inter pole winding is used for producing residual flux
  • (4) Compensating winding is used for neutralizing armature reaction while inter pole winding is used for improving commutation

Q3. A synchronous generator is feeding a zero power factor (lagging) load at rated current. The armature reaction is

  • (1) magnetizing
  • (2) demagnetizing
  • (4) ineffective

Q4. In a transformer, zero voltage regulation at full load is

  • (1) not possible
  • (2) possible at unity power factor load
  • (3) possible at leading power factor load
  • (4) possible at lagging power factor load

Q5. The DC motor, which can provide zero speed regulation at full load without any controller, is

  • (1) series
  • (2) shunt
  • (3) cumulative compound
  • (4) differential compound

Question paper preview

Scanned pages 1–2 for reference. Download the official PDF for the full paper.

Page 1
RPSC Lecturer Electrical Engineering 2011 question paper page 1 instructions scan PDF download
Page 2
RPSC Lecturer Electrical Engineering 2011 question paper page 1 instructions scan PDF download

Free question paper download

Download question paper PDF

  • 333 KB
  • 16 pages
  • PDF format

Frequently asked questions

What is the exam name for this question paper?

The exam name is LECTURER (TECH. EDU.).

Which year is this RPSC Lecturer question paper from?

This question paper is from the year 2011.

Who is the conducting body for this examination?

The conducting body is RPSC (Rajasthan Public Service Commission).

What is the subject of this question paper?

The subject is Electrical Engineering.

What is the maximum marks for the Electrical Engineering Lecturer paper?

The maximum marks for the paper are 100.

What is the duration allowed for the exam?

The time allowed for the exam is 2 Hours.

← Back to Lecturer papers