UPSC ESE 2016 Electrical Eng Paper II Q1 Descriptive

Central Government Jobs Engineer 2016

  • Year 2016
  • Conducted By UPSC
  • Maximum Marks 250
  • Duration Three Hours प्रश्न-पत्र के लिए विशिष्ट अनुदेश कृपया प्रश्नों के उत्तर देने से पूर्व निम्नलिखित प्रत्येक अनुदेश को ध्यानपूर्वक पढ़ें : इसमें आठ प्रश्न हैं जो दो खण्डों में विभाजित हैं तथा हिन्दी और अंग्रेज़ी दोनों में छपे हैं । परीक्षार्थी को कुल पाँच प्रश्नों के उत्तर देने हैं । प्रश्न संख्या 1 और 5 अनिवार्य हैं तथा बाकी में से प्रत्येक खण्ड से कम-से-कम

Exam Details

Detail Information
Examination UPSC Combined Engineering Services Examination (ESE)
Year 2016
Conducting Body UPSC
Duration Three Hours प्रश्न-पत्र के लिए विशिष्ट अनुदेश कृपया प्रश्नों के उत्तर देने से पूर्व निम्नलिखित प्रत्येक अनुदेश को ध्यानपूर्वक पढ़ें : इसमें आठ प्रश्न हैं जो दो खण्डों में विभाजित हैं तथा हिन्दी और अंग्रेज़ी दोनों में छपे हैं । परीक्षार्थी को कुल पाँच प्रश्नों के उत्तर देने हैं । प्रश्न संख्या 1 और 5 अनिवार्य हैं तथा बाकी में से प्रत्येक खण्ड से कम-से-कम
Maximum Marks 250

This document aggregates UPSC ESE 2016 Electrical Engineering Paper II content. Page 1 presents exam metadata, instructions, languages, and overall structure. Page 2 provides the corrected Q1 with four subparts (a–d). Subpart (a) involves calculating power dissipation in an 820 Ω resistor given a 10 mA current and measurement accuracy. Subpart (b) asks for the net absorption of reactive power in a system with two parallel transmission paths and two tap-changing transformers with 0.18 p.u. reactance on 200 MVA bases, for taps 1:11 and 1:0.9. Subpart (c) compares memory-mapped I/O with peripheral-mapped I/O for the 8085 microprocessor and discusses aliasing and its mitigation. Subpart (d) requests an explanation of the Shannon sampling theorem. The content blends Hindi and English prompts and emphasizes standard notations, accuracy, and data assumptions. This set forms the basis for SEO-rich content on exam topics including measurement uncertainty, per-unit analysis, transformer taps, I/O architectures, aliasing, and sampling theory.

Major Topics Covered

  • Power systems
  • Measurement uncertainty
  • Analog/digital measurement
  • Per-unit system
  • Transformer tap-changing
  • Reactive power
  • Impedance in transmission lines
  • Memory-mapped I/O
  • Peripheral-mapped I/O
  • Aliasing
  • Shannon's sampling theorem
  • Sampling theory
  • UPSC ESE examination pattern
  • Electrical machines fundamentals
  • Circuit analysis
  • Voltage and current phasors
  • Base MVA calculations
  • p.u. voltage concepts
  • Digital-analog interfaces
  • Microprocessor I/O architectures

Why This Paper is Important

  • Useful for UPSC Combined Engineering Services Exami preparation
  • Helps understand the latest exam pattern
  • Useful for practice and self-assessment
  • Covers frequently asked General Studies topics
  • Helpful for analysing question trends

Related Resources

Instructions

  • पुस्तिका के मुख-पृष्ठ पर अंकित निर्दिष्ट स्थान पर किया जाना चाहिए ।
  • उल्लिखित माध्यम के अतिरिक्त अन्य किसी माध्यम में लिखे गए उत्तर पर कोई अंक नहीं मिलेंगे ।
  • यदि आवश्यक हो, तो उपयुक्त आँकड़ों का चयन कीजिए, तथा उनको निर्दिष्ट कीजिए ।
  • जब तक उल्लिखित न हो, संकेत तथा शब्दावली प्रचलित मानक अर्थों में प्रयुक्त हैं ।
  • प्रश्नों के उत्तरों की गणना क्रमानुसार की जाएगी ।
  • यदि काटा नहीं हो, तो प्रश्न के उत्तर की गणना की जाएगी चाहे वह उत्तर अंशतः दिया गया हो ।
  • प्रश्न-सह-उत्तर पुस्तिका में खाली छोड़ा हुआ पृष्ठ या उसके अंश को स्पष्ट रूप से काटा जाना चाहिए ।

  • There are EIGHT questions divided in TWO SECTIONS and printed both in HINDI and in ENGLISH.
  • Candidate has to attempt FIVE questions in all.
  • Questions no. 1 and 5 are compulsory and out of the remaining, THREE are to be attempted choosing at least ONE from each section.
  • The number of marks carried by a question / part is indicated against it.
  • Answers must be written in the medium authorized in the Admission Certificate which must be stated clearly on the cover of this Question-cum-Answer (QCA) Booklet in the space provided.
  • No marks will be given for answers written in a medium other than the authorized one.
  • Assume suitable data, if considered necessary, and indicate the same clearly.
  • Unless otherwise mentioned, symbols and notations carry their usual standard meanings.
  • Attempts of questions shall be counted in sequential order.
  • Unless struck off, attempt of a question shall be counted even if attempted partly.
  • Any page or portion of the page left blank in the Question-cum-Answer Booklet must be clearly struck off. 1 M-ESC-D-ETE

Questions (page 2)

Q1. Q1. 10×5=50 Answer all of the following: ± 10% परिशुद्धता के एक 820 Ω प्रतिरोध में 10 mA की धारा प्रवाहित होती है। धारा (a) को 25 mA परास के एनालॉग मीटर, जिसकी पूर्ण पैमाने की परिशुद्धता ± 2% है, से मापा गया। प्रतिरोधक में कितनी शक्ति खर्च हुई, इसका परिकलन कीजिए और परिणाम की परिशुद्धता का निर्धारण कीजिए। An 820 Ω resistance with an accuracy of ± 10% carries a current of 10 mA. The current was measured by an analog meter of 25 mA range with an accuracy of ± 2% of full scale. Compute the power dissipated in the resistor and determine the accuracy of the result. Two sub-stations are connected by two lines in parallel with negligible impedance, but each containing a tap-changing transformer of reactance 0.18 p.u. on the basis of its rating of 200 MVA. Find the net absorption of reactive power when the transformer taps are set to 1:11 and 1:0.9 respectively. Assume p.u. voltages to be equal at the two ends and also at the sub-stations. 8085 माइक्रोप्रोसेसर के लिए मेमोरी मेप्ड I/O (इनपुट/आउटपुट) की तुलना पेरिफेरल मेप्ड I/O से कीजिए। एलियासिंग से आप क्या समझते हैं? एलियासिंग को कैसे दूर किया जा सकता है? शैनन का प्रतिचयन थ्योरम बताइए और समझाइए। What do you mean by aliasing? How can aliasing be removed? State and explain Shannon's sampling theorem.

() (a) धारा (a) को 25 mA परास के एनालॉग मीटर, जिसकी पूर्ण पैमाने की परिशुद्धता ± 2% है, से मापा गया।

() (b) दो सब-स्टेशनों को दो समांतर लाइनों, जिनकी प्रतिबाधा नगण्य है, के द्वारा जोड़ा गया है, परंतु प्रत्येक में 0.18 p.u. प्रतिबाधा के टैप-चेंजिंग ट्रांसफॉर्मर लगे हुए हैं । जब ट्रांसफॉर्मर टैपों को क्रमश: 1:11 और 1:0.9 पर रखा (सेट किया) गया हो, तब प्रतिरोधी शक्ति के निवल अवशोषण का मान ज्ञात कीजिए । मान लीजिए कि p.u. वोल्टताएँ दोनों सिरों पर एवं सब-स्टेशनों पर भी बराबर हैं।

() (c) 8085 माइक्रोप्रोसेसर के लिए मेमोरी मेप्ड I/O (इनपुट/आउटपुट) की तुलना पेरिफेरल मेप्ड I/O से कीजिए । एलियासिंग से आप क्या समझते हैं ? एलियासिंग को कैसे दूर किया जा सकता है ?

() (d) प्रतिचयन थ्योरम बताइए और समझाइए । What do you mean by aliasing ? How can aliasing be removed ? State and explain Shannon's sampling theorem.

Question paper preview

Scanned pages 1–2 for reference. Download the official PDF for the full paper.

Page 1
UPSC ESE 2016 Electrical Eng Paper II Q1 Descriptive — page 1 instructions scan PDF download
Page 2
UPSC ESE 2016 Electrical Eng Paper II Q1 Descriptive — page 1 instructions scan PDF download

Free question paper download

Download question paper PDF

  • 11.3 MB
  • 16 pages
  • PDF format

Frequently asked questions

What is the UPSC ESE Electrical Engineering Paper II?

It is the mains-level paper of the UPSC Combined Engineering Services Examination for Electrical Engineering.

How many questions are in the paper and which are compulsory?

There are eight questions divided into two sections; candidates must answer five questions in all, with questions 1 and 5 compulsory.

What are the maximum marks and duration?

Maximum marks are 250 and the duration is three hours.

In which languages are the questions printed?

Questions are printed in Hindi and English.

What is per-unit in the context of power systems?

Per-unit is a normalized system of expressing electrical quantities using a base MVA and base voltage, facilitating comparative studies across equipment.

What is aliasing in sampling, and how can it be mitigated?

Aliasing is distortion that occurs when sampling frequency is insufficient to capture signal variations; it can be mitigated by sampling at or above the Nyquist rate and proper anti-aliasing filtering.

← Back to Engineer papers