JPSC 4th Combined Civil Services PT Electrical Engineering Question Paper 2011 PDF

Jharkhand Government Jobs Engineer

  • Conducted By JPSC
  • Maximum Marks 200
  • Duration 2 Hours
  • Languages English & Hindi

Exam Details

Detail Information
Examination 4th COMBINED CIVIL SERVICES (PT) EXAM
Conducting Body JPSC
Paper ELECTRICAL ENGINEERING
Subject Electrical Engineering
Duration 2 Hours
Maximum Marks 200
Question Type Objective (MCQ)

This document contains the question paper for the Electrical Engineering (08) paper of the 4th Combined Civil Services (PT) Examination 2011, conducted by JPSC. The paper is designed for objective-type questions, allowing a duration of 2 hours and carrying a maximum of 200 marks. Aspirants preparing for the JPSC examinations can use this paper to understand the exam pattern, question difficulty, and important topics covered in Electrical Engineering. It serves as a valuable resource for practice and revision, helping candidates gauge their preparation level and identify areas for improvement.

Major Topics Covered

  • Fleming's right hand rule
  • Induced e.m.f.
  • D.C. machines
  • Residual magnetism
  • Transformer lamination thickness
  • Demand factor
  • Maximum demand
  • Average demand
  • Connected load
  • Power factor (kVA, kW, kVAR)
  • Triac
  • Three-phase half-wave rectifier
  • Diode conduction duration

Why This Paper is Important

  • Useful for 4th COMBINED CIVIL SERVICES (PT) EXAM preparation
  • Helps understand the latest exam pattern
  • Useful for practice and self-assessment
  • Covers frequently asked General Studies topics
  • Helpful for analysing question trends

Related Resources

  • JPSC Electrical Engineering Previous Year Papers
  • JPSC Combined Civil Services PT 2010 Question Paper
  • JPSC Combined Civil Services PT 2012 Question Paper
  • Electrical Engineering Objective Questions PDF
  • JPSC 4th Combined Civil Services PT 2011 Electrical Engineering Answer Key
  • JPSC Electrical Engineering Syllabus
  • JPSC Combined Civil Services PT Syllabus
  • JPSC Combined Civil Services PT Exam Pattern

Instructions

  • जब तक कहा न जाए तब तक इस प्रश्न-पुस्तिका Booklet until you are told to do so. को न खोलें।
  • परीक्षा शुरू करने से पहले परीक्षार्थी को information in the space provided ओ० एम० आर० - उत्तर-पत्रिका में आवश्यक on the OMR Answer Sheet before जानकारी निर्धारित स्थान पर अवश्य भर लेनी 35 commencement of the test. चाहिए।
  • सही उत्तर चिह्नित करने के लिए निर्धारित एक गोले darken one circle by black or blue ball- point pen only. Please do not mark on को काले या नीले बॉलपेन द्वारा चिह्नित करें।
  • एक more than one circle. Darkening on से अधिक गोलों को काला चिह्नित न करें।
  • एक से more than one circle against an answer अधिक गोले को उत्तर के रूप में चिह्नित करने पर will be treated as wrong answer. उस उत्तर को गलत माना जाएगा।
  • Do not detach any leaf from this इस प्रश्न-पुस्तिका में से किसी भी पन्ने को अलग न Question Booklet. After the examina-
  • करें। परीक्षा समाप्ति के उपरान्त पूरी प्रश्न-पुस्तिका tion, hand over separately the entire Question Booklet and Answer Sheet to तथा उत्तर-पत्रिका को अलग-अलग कक्ष-निरीक्षक the Room Invigilator. को सौंप दें।
  • प्रत्येक प्रश्न 2 अंकों का है। गलत उत्तर के लिए is no negative marking for any wrong कोई अंक नहीं काटा जाएगा। answer.
  • परीक्षा भवन में संगणक, मोबाइल फोन एवं पेजर
  • Possession and use of Calculator, को अपने पास रखना और उसका प्रयोग करना Mobile Phone and Pager is prohibited in the Examination Hall. वर्जित है।
  • किसी भी प्रश्न के हिन्दी अनुवाद में किसी भी
  • For any discrepancy in the translated version of any question in Hindi, the प्रकार की विसंगति पाए जाने पर, अंग्रेजी भाषा में English version of the question will be दिया गया प्रश्न मान्य होगा। valid. आपको परीक्षा के समय की समाप्ति पर प्रश्न-
  • You should return the Question पुस्तिका को निरीक्षक महोदय को लौटाना होगा Booklet to the Invigilator at the end और परीक्षा भवन से बाहर जाते समय कोई भी of the examination and should not carry any paper with you outside the कागज अपने साथ नहीं ले जाना होगा। Examination Hall.

Questions (page 2)

Q1. While applying Fleming's right-hand rule to find the direction of induced e.m.f., the thumb points towards

  • (a) direction of flux
  • (b) direction of induced e.m.f.
  • (c) direction of motion of the conductor if forefinger points along the lines of the flux
  • (d) direction of motion of the conductor if forefinger points in the direction of induced e.m.f.

Q2. In d.c. machines, the residual magnetism is of the order of

  • (a) 2 to 3 per cent
  • (b) 10 to 15 per cent
  • (c) 20 to 25 per cent
  • (d) 50 to 75 per cent

Q3. The thickness of laminations used in a transformer is usually

  • (a) 0.4 mm to 0.5 mm
  • (b) 4 mm to 5 mm
  • (c) 14 mm to 15 mm
  • (d) 25 mm to 40 mm

Q4. Demand factor is the ratio of

  • (a) maximum demand / average demand
  • (b) maximum demand / connected load
  • (c) connected load / maximum demand
  • (d) average demand / maximum demand

Q5. Which of the following relations is valid?

Q6. A triac is a

  • (a) 2-terminal switch
  • (b) 2-terminal bilateral switch
  • (c) 3-terminal unilateral switch
  • (d) 3-terminal bidirectional switch

Q7. In a three-phase half-wave rectifier, each diode conducts for a duration of

  • (a) 180°
  • (b) 120°
  • (c) 90°
  • (d) 60°

Question paper preview

Scanned pages 1–2 for reference. Download the official PDF for the full paper.

Page 1
JPSC 4th Combined Civil Services PT Exam 2011 Electrical Engineering question paper page 1 instructions scan PDF download. Includes exam name, paper code, time, marks, and candidate instructions in English and Hindi.
Page 2
JPSC 4th Combined Civil Services PT Exam 2011 Electrical Engineering question paper page 1 instructions scan PDF download. Includes exam name, paper code, time, marks, and candidate instructions in English and Hindi.

Free question paper download

Download question paper PDF

  • 2.7 MB
  • 36 pages
  • PDF format

Frequently asked questions

What is the name of the exam?

The exam is the 4th Combined Civil Services (PT) Exam.

Which conducting body organized this exam?

The exam was conducted by JPSC.

What is the subject of this question paper?

The subject is Electrical Engineering, with paper code (08).

What is the maximum marks for this paper?

The maximum marks for this paper are 200.

What is the time duration allowed for the exam?

The time allowed for the exam is 2 Hours.

What type of questions are included in this paper?

The paper consists of objective-type questions.

← Back to Engineer papers