BPSC Motor Vehicle Inspector Mechanical Engineering Paper II Question Paper PDF
- Conducted By BPSC
- Questions 100
- Maximum Marks 100
- Duration 2 Hours
- Languages English
Exam Details
| Detail | Information |
|---|---|
| Examination | Motor Vehicle Inspector |
| Conducting Body | BPSC |
| Paper | Mechanical Engineering Paper II |
| Subject | Mechanical Engineering |
| Duration | 2 Hours |
| Maximum Marks | 100 |
| Number of Questions | 100 |
| Question Type | Objective (MCQ) |
This document contains the question paper for the Mechanical Engineering Paper II of the BPSC Motor Vehicle Inspector examination. The paper consists of 100 objective questions, with a maximum of 100 marks and a time limit of 2 hours. This paper is crucial for aspirants preparing for the MVI recruitment, providing insights into the exam pattern, difficulty level, and key topics covered. Understanding the structure and content of this paper can significantly aid in targeted preparation and improve performance in the examination.
Major Topics Covered
- Vibration Isolation
- Stress and Strain
- Modulus of Rigidity
- Bulk Modulus
- Poisson's Ratio
- Gears
- Springs
- Friction
- Columns
- Keys
Why This Paper is Important
- Useful for Motor Vehicle Inspector preparation
- Helps understand the latest exam pattern
- Useful for practice and self-assessment
- Covers frequently asked General Studies topics
- Helpful for analysing question trends
Related Resources
- BPSC Motor Vehicle Inspector Mechanical Engineering Paper I
- BPSC Assistant Engineer Mechanical Engineering Paper
- SSC JE Mechanical Engineering Previous Year Papers
- BPSC Motor Vehicle Inspector Mechanical Engineering Paper II Answer Key
- BPSC Motor Vehicle Inspector Syllabus
- Mechanical Engineering Syllabus for Competitive Exams
- BPSC Motor Vehicle Inspector Exam Pattern
- Mechanical Engineering Exam Pattern
Instructions
- An Answer Sheet has been supplied inside the Question Booklet to mark the answers.
- Roll Number and encode it and write other particulars in the space provided in the Answer Sheet, failing which your Answer Sheet will not be evaluated.
- Immediately after commencement of the examination, you should check up your Question Booklet and
- attached answer sheet and ensure that the Question Booklet Series is printed on the top right hand corner of the Booklet and the series encoded in answer sheet are same.
- Also please check that the Booklet contains 16 printed pages including two pages (Page Nos. 15 and
- for Rough Work and no page or question is missing or unprinted or torn or repeated or question booklet and answer sheet have different series.
- If you find any defect in this Booklet and attached answer sheet, get it replaced Immediately by a complete Booklet with OMR sheet of the same series.
- You must write your Roll Number in the space provided on the top of this page.
- Do not write anything else
- Questions and their responses are printed in English version in this Booklet.
- You are to select ONLY ONE correct response and mark it in your Answer Sheet.
- In case you feel that there are more than one correct response, mark the response which you consider the best.
- In any case choose ONLY ONE response for each question.
- In the Answer Sheet, there are four circles - (A), (B), (C) and (D) against each question.
- questions, you are to mark with Black/Blue ink ballpoint pen ONLY ONE circle of your choice for each question.
- Select only one response for each question and mark it in your Answer Sheet.
- If you mark more than one circle for one question, the answer will be treated as wrong.
- Use Black/Blue ink ballpoint pen only to mark the answer in the Answer Sheet.
- You should not remove or tear off any sheet from the Question Booklet.
- Question Booklet and the Answer Sheet out of the Examination Hall during the examination.
- After the examination has concluded, you must hand over your Answer Sheet to the Invigilator.
- Thereafter, you are permitted to take away the Question Booklet with you.
- Failure to comply with any of the above instructions will render you liable to such action or penalty as the
- Commission may decide at their discretion.
- Candidates must assure before leaving the Examination Hall that their Answer Sheets will be kept in Self Adhesive LDPE Bag and completely packed/sealed in their presence. PD-302
Questions (page 2)
Q5. n external gear with 65 teeth meshes with a nion of 15 teeth, module being 4 mm. What the centre distance in mm?
Q6. C )) 100 leaf spring is supported at the- Ends and loaded at centre J) Centre and loaded at the ends 3) C Ends and loaded anywhere )) Centre and loaded anywhere ladder is resting on a rough ground and aning against a smooth vertical wall. The rce of friction will act- J) Downward at its upper end 3) Upward at its upper end C Zero at its upper end Perpendicular to the wall at its upper end )) he effective length 'L' of a column fixed at oth ends as compared to its actual length 'l' is A) 3) C )) hat is sunk key made in the form of a egment of a circular disc of uniform ickness, known as?
Question paper preview
Scanned pages 1–2 for reference. Download the official PDF for the full paper.
Free question paper download
Download question paper PDF
Your download starts in 10s
Preparing your question paper file…
Frequently asked questions
What is the name of the exam?
The exam is for the Motor Vehicle Inspector position.
Which board conducts this exam?
The Bihar Public Service Commission (BPSC) conducts this exam.
What is the subject of this question paper?
This question paper is for Mechanical Engineering Paper II.
How many questions are there in the paper?
There are 100 questions in this paper.
What is the maximum mark for this paper?
The maximum marks for this paper is 100.
What is the time allowed to complete the paper?
The time allowed to complete the paper is 2 hours.